CISCO-LWAPP-MESH-LINKTEST-MIB :: clMeshLtRxLowestNoiseFloor

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LWAPP-MESH-LINKTEST-MIB › clMeshLtRxLowestNoiseFloor

clMeshLtRxLowestNoiseFloor

Module: CISCO-LWAPP-MESH-LINKTEST-MIB

OID (symbolic): CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtRxLowestNoiseFloor

OID (numeric): 1.3.6.1.4.1.9.9.606.1.3.1.1.15

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The lowest Noise Floor value observed at the mesh node specified by clMeshLtDestMacAddress. The noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

What is clMeshLtRxLowestNoiseFloor?

Reports the lowest background noise level (noise floor) measured at the destination mesh node during the linktest.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.606.1.3.1.1.15
snmpwalk -v2c -c public <target> CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtRxLowestNoiseFloor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.606.1.3.1.1.15.1
snmpget -v2c -c public <target> CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtRxLowestNoiseFloor.1

Start monitoring Cisco Wireless LAN Controller / mesh access point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtRxLowestNoiseFloor OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controller / mesh access point from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.606ciscoLwappMeshLinkTestMIBCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1ciscoLwappMeshLinkTestMIBObjectsCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1.3ciscoLwappMeshLinkTestStatusCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1.3.1clMeshLtResultsTableCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1.3.1.1clMeshLtResultsEntryCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1.3.1.1.15clMeshLtRxLowestNoiseFloorCISCO-LWAPP-MESH-LINKTEST-MIB