CISCO-LWAPP-MESH-LINKTEST-MIB :: clMeshLtPurgeTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LWAPP-MESH-LINKTEST-MIB › clMeshLtPurgeTime

clMeshLtPurgeTime

Module: CISCO-LWAPP-MESH-LINKTEST-MIB

OID (symbolic): CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtPurgeTime

OID (numeric): 1.3.6.1.4.1.9.9.606.1.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object indicates the duration for which the results of a particular run of linktest is available in clMeshLtResultsTable from the time of completion of that run of linktest. At the expiry of this time, after the completion of the linktest, the entries corresponding to the linktest and the corresponding results are removed from clMeshLtTable and clMeshLtResultsTable respectively.

What is clMeshLtPurgeTime?

A configurable value specifying how long completed link test results remain available in the results table before being purged after the test finishes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.606.1.1.1
snmpwalk -v2c -c public <target> CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtPurgeTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.606.1.1.1.1
snmpget -v2c -c public <target> CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtPurgeTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.606.1.1.1.1 i <value>

Start monitoring Cisco Wireless LAN Controller / mesh access point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtPurgeTime OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controller / mesh access point from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.606ciscoLwappMeshLinkTestMIBCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1ciscoLwappMeshLinkTestMIBObjectsCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1.1ciscoLwappMeshLinkTestConfigCISCO-LWAPP-MESH-LINKTEST-MIB
1.3.6.1.4.1.9.9.606.1.1.1clMeshLtPurgeTimeCISCO-LWAPP-MESH-LINKTEST-MIB