All MIBs › CISCO-LWAPP-MESH-LINKTEST-MIB › clMeshLtDataRate
clMeshLtDataRate
Module: CISCO-LWAPP-MESH-LINKTEST-MIB
OID (symbolic): CISCO-LWAPP-MESH-LINKTEST-MIB::clMeshLtDataRate
OID (numeric): 1.3.6.1.4.1.9.9.606.1.2.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: This object represents the data rate on backhaul link at which link test will be performed. Depending on the backhaul radio type, data rate will vary. if the backhaul radio is 802.11a, data rates can be one of the following possible values. Rates - 6,9,11,12,18,24,36,48,54,108 Mbps. If backhaul link is 802.11b then data rate can be 1,2,5.5,6,9,11 If backhaul link is 802.11g 1,2,5.5,6,9,11,12,18,24,36,48,54,108. This object must be set to a valid value when setting clMeshLtRowStatus to 'createAndGo' to initiate a run of linktest. This object is deprecated and superceded by clMeshLtDataRateValue object.
What is clMeshLtDataRate?
Configures the data rate on the backhaul link at which the link test will run; valid rate values depend on the backhaul radio type (e.g. 802.11a).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.606 | ciscoLwappMeshLinkTestMIB | CISCO-LWAPP-MESH-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.606.1 | ciscoLwappMeshLinkTestMIBObjects | CISCO-LWAPP-MESH-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.606.1.2 | ciscoLwappMeshLinkTestRun | CISCO-LWAPP-MESH-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.606.1.2.1 | clMeshLtTable | CISCO-LWAPP-MESH-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.606.1.2.1.1 | clMeshLtEntry | CISCO-LWAPP-MESH-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.606.1.2.1.1.4 | clMeshLtDataRate | CISCO-LWAPP-MESH-LINKTEST-MIB |