All MIBs › CISCO-LWAPP-LOCAL-AUTH-MIB › cllaUserPriorityNumber
cllaUserPriorityNumber
Module: CISCO-LWAPP-LOCAL-AUTH-MIB
OID (symbolic): CISCO-LWAPP-LOCAL-AUTH-MIB::cllaUserPriorityNumber
OID (numeric): 1.3.6.1.4.1.9.9.619.1.1.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies the order in which the user credentials are validated by the controller. At start up, the agent assigns the value of this object. Later this can be changed by the management station. This object reflects the priority in which the user credential information is applied. A lower value indicates an higher priority. For example, an entry set to value '1' has a higher priority over an entry set to value '2'. The zero value indicates that the priority is not set. No two instances of this object will have the same priority.
What is cllaUserPriorityNumber?
This read-write object sets the priority order in which the controller checks different user credential sources (e.g., local database, RADIUS, LDAP) when validating a user during local EAP authentication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.619.1.1.4.1.2 snmpwalk -v2c -c public <target> CISCO-LWAPP-LOCAL-AUTH-MIB::cllaUserPriorityNumber
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.619.1.1.4.1.2.1 snmpget -v2c -c public <target> CISCO-LWAPP-LOCAL-AUTH-MIB::cllaUserPriorityNumber.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.619.1.1.4.1.2.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-LOCAL-AUTH-MIB::cllaUserPriorityNumber OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.619 | ciscoLwappLocalAuthMIB | CISCO-LWAPP-LOCAL-AUTH-MIB |
| 1.3.6.1.4.1.9.9.619.1 | ciscoLwappLocalAuthMIBObjects | CISCO-LWAPP-LOCAL-AUTH-MIB |
| 1.3.6.1.4.1.9.9.619.1.1 | cllaConfig | CISCO-LWAPP-LOCAL-AUTH-MIB |
| 1.3.6.1.4.1.9.9.619.1.1.4 | cllaUserPriorityTable | CISCO-LWAPP-LOCAL-AUTH-MIB |
| 1.3.6.1.4.1.9.9.619.1.1.4.1 | cllaUserPriorityEntry | CISCO-LWAPP-LOCAL-AUTH-MIB |
| 1.3.6.1.4.1.9.9.619.1.1.4.1.2 | cllaUserPriorityNumber | CISCO-LWAPP-LOCAL-AUTH-MIB |