CISCO-LWAPP-LOCAL-AUTH-MIB :: cllaEapDynamicWepKeyIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LWAPP-LOCAL-AUTH-MIB › cllaEapDynamicWepKeyIndex

cllaEapDynamicWepKeyIndex

Module: CISCO-LWAPP-LOCAL-AUTH-MIB

OID (symbolic): CISCO-LWAPP-LOCAL-AUTH-MIB::cllaEapDynamicWepKeyIndex

OID (numeric): 1.3.6.1.4.1.9.9.619.1.1.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies key index for the EAP dynamic Wired Equivalent Privacy security policy.

It applies to Static WEP key index of WLAN which has layer 2 security of type Static WEP. According to 802.11 standard 4 keys are supported for informing Mobile Station (clients) which key it should use for Static WEP Authentication

The default value of 0 works for all devices, but for some old devices/clients which uses the unicast key as 3, the key index has to be configured to 3 to match the client side setting.

What is cllaEapDynamicWepKeyIndex?

This read-write object configures which of the four 802.11 WEP key slots is used for the EAP dynamic Wired Equivalent Privacy security policy on a WLAN configured with Static WEP layer 2 security.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.619.1.1.1.4
snmpwalk -v2c -c public <target> CISCO-LWAPP-LOCAL-AUTH-MIB::cllaEapDynamicWepKeyIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.619.1.1.1.4.1
snmpget -v2c -c public <target> CISCO-LWAPP-LOCAL-AUTH-MIB::cllaEapDynamicWepKeyIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.619.1.1.1.4.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-LOCAL-AUTH-MIB::cllaEapDynamicWepKeyIndex OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.619ciscoLwappLocalAuthMIBCISCO-LWAPP-LOCAL-AUTH-MIB
1.3.6.1.4.1.9.9.619.1ciscoLwappLocalAuthMIBObjectsCISCO-LWAPP-LOCAL-AUTH-MIB
1.3.6.1.4.1.9.9.619.1.1cllaConfigCISCO-LWAPP-LOCAL-AUTH-MIB
1.3.6.1.4.1.9.9.619.1.1.1cllaLocalAuthCISCO-LWAPP-LOCAL-AUTH-MIB
1.3.6.1.4.1.9.9.619.1.1.1.4cllaEapDynamicWepKeyIndexCISCO-LWAPP-LOCAL-AUTH-MIB