All MIBs › CISCO-LWAPP-LINKTEST-MIB › cLLtClientLtStatus
cLLtClientLtStatus
Module: CISCO-LWAPP-LINKTEST-MIB
OID (symbolic): CISCO-LWAPP-LINKTEST-MIB::cLLtClientLtStatus
OID (numeric): 1.3.6.1.4.1.9.9.516.1.2.2.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the status of the linktest this particular entry corresponds to.
The semantics as follows.
'cLLtClientLtStatusFailed' - This value indicates that this particular linktest has failed.
'cLLtClientLtCcxStatusInProgress' - This value indicates that the CCX linktest is in progress.
'cLLtClientLtPngStatusInProgress' - This value indicates that the Ping-based linktest is in progress.
'cLLtClientLtStatusPingSuccess' - This value indicates that ping-based linktest between AP and client has succeeded.
Only the following columns of this table should be considered for collecting data from the ping responses. cLLtClientLtPacketsSent, cLLtClientLtPacketsRx, cLLtClientLtUplinkAvgRSSI, cLLtClientLtUplinkAvgSNR
cLLtClientLtStatusCcxLtSuccess - This value indicates that CCX linktest done to test the link between the client and the AP is successful. All the columns of this table are applicable and valid for collecting data from the CCX responses.
What is cLLtClientLtStatus?
Indicates the current status (e.g., success or failure) of a specific client linktest entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.516.1.2.2.1.25 snmpwalk -v2c -c public <target> CISCO-LWAPP-LINKTEST-MIB::cLLtClientLtStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.516.1.2.2.1.25.1 snmpget -v2c -c public <target> CISCO-LWAPP-LINKTEST-MIB::cLLtClientLtStatus.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-LINKTEST-MIB::cLLtClientLtStatus OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.516 | ciscoLwappLinkTestMIB | CISCO-LWAPP-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.516.1 | ciscoLwappLinkTestMIBObjects | CISCO-LWAPP-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.516.1.2 | ciscoLwappLinkTestRun | CISCO-LWAPP-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.516.1.2.2 | cLLtClientLTResultsTable | CISCO-LWAPP-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.516.1.2.2.1 | cLLtClientLTResultsEntry | CISCO-LWAPP-LINKTEST-MIB |
| 1.3.6.1.4.1.9.9.516.1.2.2.1.25 | cLLtClientLtStatus | CISCO-LWAPP-LINKTEST-MIB |