All MIBs › CISCO-LES-MIB › lesColocBusAtmAddrMask
lesColocBusAtmAddrMask
Module: CISCO-LES-MIB
OID (symbolic): CISCO-LES-MIB::lesColocBusAtmAddrMask
OID (numeric): 1.3.6.1.4.1.9.9.39.1.1.1.1.9
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: An address mask that when used with the lesColocatedBusAtmAddr specifies the portion of the BUS' ATM address desired by management. Note that setting this object will have the side effect of reinitializing the BUS and consequently dropping all clients connected to it. Note that this object cannot be set at row creation time without also supplying a value for the lesColocBusAtmAddrSpec object. If the BUS ATM address is omitted at creation time then this object defaults to the value of all zeros (none of the lesColocBusAtmAddrSpec value is relevant). If the BUS ATM address is specified at creation time but this object omitted, then this object defaults to the value of all ones (all of the lesColocBusAtmAddrSpec is relevant).
What is lesColocBusAtmAddrMask?
This read-write object defines an address mask used with the co-located BUS's ATM address to specify the portion of that address management wants configured; changing it reinitializes the BUS and drops existing connections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.39.1.1.1.1.9 snmpwalk -v2c -c public <target> CISCO-LES-MIB::lesColocBusAtmAddrMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.39.1.1.1.1.9.1 snmpget -v2c -c public <target> CISCO-LES-MIB::lesColocBusAtmAddrMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.39.1.1.1.1.9.1 s <value>
Start monitoring Cisco ATM switches/routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LES-MIB::lesColocBusAtmAddrMask OID value, configure state conditions and alerts, and monitor any Cisco ATM switches/routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.39 | ciscoLesMIB | CISCO-LES-MIB |
| 1.3.6.1.4.1.9.9.39.1 | ciscoLesMIBObjects | CISCO-LES-MIB |
| 1.3.6.1.4.1.9.9.39.1.1 | les | CISCO-LES-MIB |
| 1.3.6.1.4.1.9.9.39.1.1.1 | lesTable | CISCO-LES-MIB |
| 1.3.6.1.4.1.9.9.39.1.1.1.1 | lesEntry | CISCO-LES-MIB |
| 1.3.6.1.4.1.9.9.39.1.1.1.1.9 | lesColocBusAtmAddrMask | CISCO-LES-MIB |