CISCO-LES-MIB :: lesAtmAddrMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LES-MIBlesAtmAddrMask

lesAtmAddrMask

Module: CISCO-LES-MIB

OID (symbolic): CISCO-LES-MIB::lesAtmAddrMask

OID (numeric): 1.3.6.1.4.1.9.9.39.1.1.1.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: An address mask that when used with the lesAtmAddrSpec specifies the portion of the LES' ATM address that is desired to be configured. Note that setting this object will result in the reinitialization of the LES,consequently dropping all clients connected to it. Note that this object cannot be set at row creation time without also supplying a value for the lesAtmAddrSpec object. If the LES ATM address is omitted at creation time then this object defaults to the value of all zeros (none of the lesAtmAddrSpec value is relevant). If the LES ATM address is specified at creation time but this object omitted, then this object defaults to the value of all ones (all of the lesAtmAddrSpec is relevant).

What is lesAtmAddrMask?

This read-write object defines an address mask used with the LES ATM address specification to identify which portion of the LES's ATM address should be configured; changing it reinitializes the LES and drops existing connections.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.39.1.1.1.1.4
snmpwalk -v2c -c public <target> CISCO-LES-MIB::lesAtmAddrMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.39.1.1.1.1.4.1
snmpget -v2c -c public <target> CISCO-LES-MIB::lesAtmAddrMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.39.1.1.1.1.4.1 s <value>

Start monitoring Cisco ATM switches/routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LES-MIB::lesAtmAddrMask OID value, configure state conditions and alerts, and monitor any Cisco ATM switches/routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.39ciscoLesMIBCISCO-LES-MIB
1.3.6.1.4.1.9.9.39.1ciscoLesMIBObjectsCISCO-LES-MIB
1.3.6.1.4.1.9.9.39.1.1lesCISCO-LES-MIB
1.3.6.1.4.1.9.9.39.1.1.1lesTableCISCO-LES-MIB
1.3.6.1.4.1.9.9.39.1.1.1.1lesEntryCISCO-LES-MIB
1.3.6.1.4.1.9.9.39.1.1.1.1.4lesAtmAddrMaskCISCO-LES-MIB