All MIBs › CISCO-LECS-MIB › lecsConfigTblDefaultElanName
lecsConfigTblDefaultElanName
Module: CISCO-LECS-MIB
OID (symbolic): CISCO-LECS-MIB::lecsConfigTblDefaultElanName
OID (numeric): 1.3.6.1.4.1.9.9.38.1.2.1.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The ELAN name assigned to LE clients who do not specify what ELAN they wish to join when issuing a configuration request. It is important to understand when the default ELAN name will be used. If the LEC specifies an ELAN name in its configuration request and a different mapping or a conflicting mapping is present for that LEC then the default ELAN will not be used and a failure will be returned. If the LEC does not specify the ELAN name in the configuration request and there is no mapping within the LECS then the default elan name will be used and a successful reply will be returned (provided the rest of the request is valid). If there is no default ELAN specified for this configuration table then a LE client, with no mapping to any elan, will be rejected from configuration regardless of the parameters of the configuration request. The default value (''H) indicates that no default ELAN name is selected. The default ELAN cannot have an access type of closed. Attempting to set the default ELAN type to a closed ELAN will result in an error.
What is lecsConfigTblDefaultElanName?
This string is the ELAN name handed to LE clients that don't specify which ELAN they want to join in their configuration request, but the MIB is explicit that it is only used when the client's own request has no conflicting or more-specific mapping already defined. An admin cares because this default is what determines where 'unopinionated' clients land, and a wrong default can silently drop new devices into the wrong broadcast domain. For example, setting this to 'default-elan' means any LEC that omits an ELAN name in its LE_CONFIGURE_REQUEST gets placed on default-elan rather than being rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.38.1.2.1.1.2 snmpwalk -v2c -c public <target> CISCO-LECS-MIB::lecsConfigTblDefaultElanName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.38.1.2.1.1.2.1 snmpget -v2c -c public <target> CISCO-LECS-MIB::lecsConfigTblDefaultElanName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.38.1.2.1.1.2.1 s <value>
Start monitoring Cisco ATM switch/router (LANE LECS, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LECS-MIB::lecsConfigTblDefaultElanName OID value, configure state conditions and alerts, and monitor any Cisco ATM switch/router (LANE LECS, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.38 | ciscoLecsMIB | CISCO-LECS-MIB |
| 1.3.6.1.4.1.9.9.38.1 | ciscoLecsMIBObjects | CISCO-LECS-MIB |
| 1.3.6.1.4.1.9.9.38.1.2 | config | CISCO-LECS-MIB |
| 1.3.6.1.4.1.9.9.38.1.2.1 | lecsConfigTblTable | CISCO-LECS-MIB |
| 1.3.6.1.4.1.9.9.38.1.2.1.1 | lecsConfigTblEntry | CISCO-LECS-MIB |
| 1.3.6.1.4.1.9.9.38.1.2.1.1.2 | lecsConfigTblDefaultElanName | CISCO-LECS-MIB |