CISCO-LECS-MIB :: lecsAtmAddrActual

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LECS-MIB › lecsAtmAddrActual

lecsAtmAddrActual

Module: CISCO-LECS-MIB

OID (symbolic): CISCO-LECS-MIB::lecsAtmAddrActual

OID (numeric): 1.3.6.1.4.1.9.9.38.1.1.2.1.4

Node type: OBJECT-TYPE

Type: AtmLaneAddress

Access: read-only

Description: The resulting address that the LECS is accepting configuration requests on for the designated interface. This address is the result of the specified ATM address, its mask and interaction through the ILMI with the switch. Note that this object is only valid when the corresponding lecsOperStatus is 'active'.

What is lecsAtmAddrActual?

This object reports the ATM address the LECS is actually using to accept configuration requests on a given interface, the resolved result of the specified address, its mask, and interaction with the switch through ILMI — and it is only meaningful once lecsOperStatus is 'active.' An admin cares because the address actually in use can differ from what was configured in lecsAtmAddrSpec if ILMI negotiation altered it, so this is the value to check when LE clients report they can't reach the LECS. For example, if lecsAtmAddrSpec only specified a partial address/mask, lecsAtmAddrActual shows the full address ILMI completed and assigned.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.38.1.1.2.1.4
snmpwalk -v2c -c public <target> CISCO-LECS-MIB::lecsAtmAddrActual

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.38.1.1.2.1.4.1
snmpget -v2c -c public <target> CISCO-LECS-MIB::lecsAtmAddrActual.1

Start monitoring Cisco ATM switch/router (LANE LECS, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LECS-MIB::lecsAtmAddrActual OID value, configure state conditions and alerts, and monitor any Cisco ATM switch/router (LANE LECS, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.38ciscoLecsMIBCISCO-LECS-MIB
1.3.6.1.4.1.9.9.38.1ciscoLecsMIBObjectsCISCO-LECS-MIB
1.3.6.1.4.1.9.9.38.1.1lecsCISCO-LECS-MIB
1.3.6.1.4.1.9.9.38.1.1.2lecsAtmAddrTableCISCO-LECS-MIB
1.3.6.1.4.1.9.9.38.1.1.2.1lecsAtmAddrEntryCISCO-LECS-MIB
1.3.6.1.4.1.9.9.38.1.1.2.1.4lecsAtmAddrActualCISCO-LECS-MIB