All MIBs › CISCO-IPSEC-SIGNALING-MIB › cisgIpsSgTunRemoteAddressType
cisgIpsSgTunRemoteAddressType
Module: CISCO-IPSEC-SIGNALING-MIB
OID (symbolic): CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgTunRemoteAddressType
OID (numeric): 1.3.6.1.4.1.9.9.438.1.1.2.1.9
Node type: OBJECT-TYPE
Type: CIPsecPhase1PeerIdentityType
Access: read-only
Description: The type of the address of the remote endpoint for the Phase-1 Tunnel.
What is cisgIpsSgTunRemoteAddressType?
This reports the type of the address for the remote endpoint of this Phase-1 tunnel, per its description - the address-family counterpart to cisgIpsSgTunLocalAddressType, but for the far side of the connection. It matters for the same dual-stack reasons as the local version, letting an admin confirm whether a specific peer is actually connecting over IPv4 or IPv6 transport, independent of what identity type it authenticated with. A partner site an admin assumed was IPv4-only showing an IPv6 remote address type here would be a specific, actionable discovery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.438.1.1.2.1.9 snmpwalk -v2c -c public <target> CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgTunRemoteAddressType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.438.1.1.2.1.9.1 snmpget -v2c -c public <target> CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgTunRemoteAddressType.1
Start monitoring Cisco VPN gateway equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgTunRemoteAddressType OID value, configure state conditions and alerts, and monitor any Cisco VPN gateway equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | CISCO-IPSEC-SIGNALING-MIB |
| 1.3.6.1.4.1.9.9.438.1 | ciscoIPsecSigMIBObjects | CISCO-IPSEC-SIGNALING-MIB |
| 1.3.6.1.4.1.9.9.438.1.1 | cisgIpsSgCurrentActivity | CISCO-IPSEC-SIGNALING-MIB |
| 1.3.6.1.4.1.9.9.438.1.1.2 | cisgIpsSgTunnelTable | CISCO-IPSEC-SIGNALING-MIB |
| 1.3.6.1.4.1.9.9.438.1.1.2.1 | cisgIpsSgTunnelEntry | CISCO-IPSEC-SIGNALING-MIB |
| 1.3.6.1.4.1.9.9.438.1.1.2.1.9 | cisgIpsSgTunRemoteAddressType | CISCO-IPSEC-SIGNALING-MIB |