CISCO-IPSEC-SIGNALING-MIB :: cisgIpsSgGlobalRespTunnels

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IPSEC-SIGNALING-MIBcisgIpsSgGlobalRespTunnels

cisgIpsSgGlobalRespTunnels

Module: CISCO-IPSEC-SIGNALING-MIB

OID (symbolic): CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalRespTunnels

OID (numeric): 1.3.6.1.4.1.9.9.438.1.1.1.1.16

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of Phase-1 currently and previously active Control Tunnels which were remotely initiated.

What is cisgIpsSgGlobalRespTunnels?

This Counter64 totals the Phase-1 control tunnels, currently and previously active, that were remotely initiated - meaning a peer reached out and this device responded, per its description. On a hub device this number should dominate, since spokes are the ones reaching out; seeing it unexpectedly low on a device configured as a hub would suggest spokes aren't successfully finding or reaching it. Comparing this against cisgIpsSgGlobalInitTunnels tells an admin at a glance whether this device is primarily acting as a VPN hub or a spoke in the current topology.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.438.1.1.1.1.16
snmpwalk -v2c -c public <target> CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalRespTunnels

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.438.1.1.1.1.16.1
snmpget -v2c -c public <target> CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalRespTunnels.1

Start monitoring Cisco VPN gateway equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalRespTunnels OID value, configure state conditions and alerts, and monitor any Cisco VPN gateway equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.438ciscoIPsecSignalingMIBCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1ciscoIPsecSigMIBObjectsCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1cisgIpsSgCurrentActivityCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1.1cisgIpsSgGlobalStatsTableCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1.1.1cisgIpsSgGlobalStatsEntryCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1.1.1.16cisgIpsSgGlobalRespTunnelsCISCO-IPSEC-SIGNALING-MIB