CISCO-IPSEC-SIGNALING-MIB :: cisgIpsSgGlobalInitTunnelFails

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IPSEC-SIGNALING-MIBcisgIpsSgGlobalInitTunnelFails

cisgIpsSgGlobalInitTunnelFails

Module: CISCO-IPSEC-SIGNALING-MIB

OID (symbolic): CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalInitTunnelFails

OID (numeric): 1.3.6.1.4.1.9.9.438.1.1.1.1.15

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of Phase-1 currently and previously active Control Tunnels which were locally initiated and failed to activate.

What is cisgIpsSgGlobalInitTunnelFails?

This Counter64 totals the locally-initiated Phase-1 control tunnels that failed to activate, per its description, the failure-rate companion to cisgIpsSgGlobalInitTunnels. Dividing this by the total initiated gives an admin a concrete success-rate metric for this device's outbound tunnel attempts, useful for spotting a systemic problem versus isolated one-off failures. A spoke router where this counter equals a third of its InitTunnels count would indicate a serious and ongoing problem with a third of its outbound connection attempts failing to establish.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.438.1.1.1.1.15
snmpwalk -v2c -c public <target> CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalInitTunnelFails

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.438.1.1.1.1.15.1
snmpget -v2c -c public <target> CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalInitTunnelFails.1

Start monitoring Cisco VPN gateway equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-SIGNALING-MIB::cisgIpsSgGlobalInitTunnelFails OID value, configure state conditions and alerts, and monitor any Cisco VPN gateway equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.438ciscoIPsecSignalingMIBCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1ciscoIPsecSigMIBObjectsCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1cisgIpsSgCurrentActivityCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1.1cisgIpsSgGlobalStatsTableCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1.1.1cisgIpsSgGlobalStatsEntryCISCO-IPSEC-SIGNALING-MIB
1.3.6.1.4.1.9.9.438.1.1.1.1.15cisgIpsSgGlobalInitTunnelFailsCISCO-IPSEC-SIGNALING-MIB