CISCO-IPSEC-MIB :: cipsIsakmpKeepaliveInterval

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IPSEC-MIB › cipsIsakmpKeepaliveInterval

cipsIsakmpKeepaliveInterval

Module: CISCO-IPSEC-MIB

OID (symbolic): CISCO-IPSEC-MIB::cipsIsakmpKeepaliveInterval

OID (numeric): 1.3.6.1.4.1.9.10.62.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The value of this object is time interval in seconds between successive ISAKMP keepalive heartbeats issued to the peers to which IKE tunnels have been setup.

What is cipsIsakmpKeepaliveInterval?

This is the interval in seconds (10-3600) between successive ISAKMP keepalive heartbeats this device sends to peers it has IKE tunnels established with, per its description. It controls how quickly a dead peer is detected - a shorter interval detects a failed peer faster but generates more keepalive traffic, while a longer one is lighter on bandwidth but slower to notice an outage. A value of 30 means this device pings each IKE peer roughly every half-minute to confirm the tunnel partner is still reachable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.62.1.1.3
snmpwalk -v2c -c public <target> CISCO-IPSEC-MIB::cipsIsakmpKeepaliveInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.62.1.1.3.1
snmpget -v2c -c public <target> CISCO-IPSEC-MIB::cipsIsakmpKeepaliveInterval.1

Start monitoring Cisco routers and VPN gateways implementing IPsec with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-MIB::cipsIsakmpKeepaliveInterval OID value, configure state conditions and alerts, and monitor any Cisco routers and VPN gateways implementing IPsec from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.62ciscoIPsecMIBCISCO-IPSEC-MIB
1.3.6.1.4.1.9.10.62.1ciscoIPsecMIBObjectsCISCO-IPSEC-MIB
1.3.6.1.4.1.9.10.62.1.1cipsIsakmpGroupCISCO-IPSEC-MIB
1.3.6.1.4.1.9.10.62.1.1.3cipsIsakmpKeepaliveIntervalCISCO-IPSEC-MIB