All MIBs › CISCO-IPSEC-FLOW-MONITOR-MIB › cipSecEndPtRemoteAddr2
cipSecEndPtRemoteAddr2
Module: CISCO-IPSEC-FLOW-MONITOR-MIB
OID (symbolic): CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtRemoteAddr2
OID (numeric): 1.3.6.1.4.1.9.9.171.1.3.3.1.11
Node type: OBJECT-TYPE
Type: IPSIpAddress
Access: read-only
Description: The remote Endpoint's second IP address specification.
If the remote Endpoint type is single IP address, then this is the value of the IP address.
If the remote Endpoint type is IP subnet, then this is the value of the subnet mask.
If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range.
What is cipSecEndPtRemoteAddr2?
This read-only value reports the second IP address component of the remote endpoint (such as a subnet mask or range end address), with its meaning depending on the remote endpoint type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.171.1.3.3.1.11 snmpwalk -v2c -c public <target> CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtRemoteAddr2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.171.1.3.3.1.11.1 snmpget -v2c -c public <target> CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtRemoteAddr2.1
Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtRemoteAddr2 OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.171 | ciscoIpSecFlowMonitorMIB | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1 | cipSecMIBObjects | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.3 | cipSecPhaseTwo | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.3.3 | cipSecEndPtTable | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.3.3.1 | cipSecEndPtEntry | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.3.3.1.11 | cipSecEndPtRemoteAddr2 | CISCO-IPSEC-FLOW-MONITOR-MIB |