All MIBs › CISCO-IPSEC-FLOW-MONITOR-MIB › cipSecEndPtHistRemoteAddr2
cipSecEndPtHistRemoteAddr2
Module: CISCO-IPSEC-FLOW-MONITOR-MIB
OID (symbolic): CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr2
OID (numeric): 1.3.6.1.4.1.9.9.171.1.4.3.2.1.13
Node type: OBJECT-TYPE
Type: IPSIpAddress
Access: read-only
Description: The remote Endpoint's second IP address specification.
If the remote Endpoint type is single IP address, then this is the value of the IP address.
If the remote Endpoint type is IP subnet, then this is the value of the subnet mask.
If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range.
What is cipSecEndPtHistRemoteAddr2?
Reports the second address value for a historical IPsec tunnel's remote endpoint, holding either the single IP address again or the subnet mask depending on the endpoint's type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.171.1.4.3.2.1.13 snmpwalk -v2c -c public <target> CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.171.1.4.3.2.1.13.1 snmpget -v2c -c public <target> CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr2.1
Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr2 OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.171 | ciscoIpSecFlowMonitorMIB | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1 | cipSecMIBObjects | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.4 | cipSecHistory | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.4.3 | cipSecHistPhaseTwo | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.4.3.2 | cipSecEndPtHistTable | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.4.3.2.1 | cipSecEndPtHistEntry | CISCO-IPSEC-FLOW-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.171.1.4.3.2.1.13 | cipSecEndPtHistRemoteAddr2 | CISCO-IPSEC-FLOW-MONITOR-MIB |