CISCO-IPSEC-FLOW-MONITOR-MIB :: cipSecEndPtHistRemoteAddr1

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IPSEC-FLOW-MONITOR-MIBcipSecEndPtHistRemoteAddr1

cipSecEndPtHistRemoteAddr1

Module: CISCO-IPSEC-FLOW-MONITOR-MIB

OID (symbolic): CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr1

OID (numeric): 1.3.6.1.4.1.9.9.171.1.4.3.2.1.12

Node type: OBJECT-TYPE

Type: IPSIpAddress

Access: read-only

Description: The remote Endpoint's first IP address specification.

If the remote Endpoint type is single IP address, then this is the value of the IP address.

If the remote Endpoint type is IP subnet, then this is the value of the subnet.

If the remote Endpoint type is IP address range, then this is the value of beginning IP address of the range.

What is cipSecEndPtHistRemoteAddr1?

Reports the first address value for a historical IPsec tunnel's remote endpoint, holding either the single IP address or the subnet address depending on the endpoint's type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.171.1.4.3.2.1.12
snmpwalk -v2c -c public <target> CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.171.1.4.3.2.1.12.1
snmpget -v2c -c public <target> CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr1.1

Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecEndPtHistRemoteAddr1 OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.171ciscoIpSecFlowMonitorMIBCISCO-IPSEC-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.171.1cipSecMIBObjectsCISCO-IPSEC-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.171.1.4cipSecHistoryCISCO-IPSEC-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.171.1.4.3cipSecHistPhaseTwoCISCO-IPSEC-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.171.1.4.3.2cipSecEndPtHistTableCISCO-IPSEC-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.171.1.4.3.2.1cipSecEndPtHistEntryCISCO-IPSEC-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.171.1.4.3.2.1.12cipSecEndPtHistRemoteAddr1CISCO-IPSEC-FLOW-MONITOR-MIB