All MIBs › CISCO-IMAGE-CHECK-MIB › ciscoImageCheckStatus
ciscoImageCheckStatus
Module: CISCO-IMAGE-CHECK-MIB
OID (symbolic): CISCO-IMAGE-CHECK-MIB::ciscoImageCheckStatus
OID (numeric): 1.3.6.1.4.1.9.9.99990.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current status of the image check operation.
If the status is inCompatLoose(3) or inCompatStrict(4), one can look at the detail reasons of incompatibilities by looking at ciscoImgChkResultsTable described below.
If the status is compatible, then there is no need to look at the ciscoImgChkResultsTable.
If the status is noStandby(6), pssErr(7), extractFail(8), fileParseErr(9) or getIncompatErr(10), there is some internal error in even starting the check compatibility process, and hence the ciscoImgChkResultsTable should not be read for any details.
inProgress(2) - Image check is in progress inCompatLoose(3) - Loose incompatibility inCompatStrict(4) - Strict incompatibility compatible(5) - images are compatible noStandby(6) - standby supervisor is absent pssErr(7) - internal error extractFail(8) - Could not extract image fileParseErr(9) - Could not parse image getIncompatErr(10) - internal error in determining incompatibilities.
What is ciscoImageCheckStatus?
This read-only OID reports the current status of an image compatibility check operation; statuses like inCompatLoose or inCompatStrict indicate incompatibilities whose details can be found in the associated results table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.99990.1.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-IMAGE-CHECK-MIB::ciscoImageCheckStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.99990.1.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-IMAGE-CHECK-MIB::ciscoImageCheckStatus.1
Start monitoring Cisco routers and switches (IOS/IOS-XE image integrity) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IMAGE-CHECK-MIB::ciscoImageCheckStatus OID value, configure state conditions and alerts, and monitor any Cisco routers and switches (IOS/IOS-XE image integrity) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.99990 | ciscoImageCheckMIB | CISCO-IMAGE-CHECK-MIB |
| 1.3.6.1.4.1.9.9.99990.1 | ciscoImageCheckMIBObjects | CISCO-IMAGE-CHECK-MIB |
| 1.3.6.1.4.1.9.9.99990.1.1 | ciscoImageCheck | CISCO-IMAGE-CHECK-MIB |
| 1.3.6.1.4.1.9.9.99990.1.1.1 | ciscoImageCheckOpTable | CISCO-IMAGE-CHECK-MIB |
| 1.3.6.1.4.1.9.9.99990.1.1.1.1 | ciscoImageCheckOpEntry | CISCO-IMAGE-CHECK-MIB |
| 1.3.6.1.4.1.9.9.99990.1.1.1.1.3 | ciscoImageCheckStatus | CISCO-IMAGE-CHECK-MIB |