All MIBs › CISCO-HSRP-MIB › cHsrpGrpConfiguredHoldTime
cHsrpGrpConfiguredHoldTime
Module: CISCO-HSRP-MIB
OID (symbolic): CISCO-HSRP-MIB::cHsrpGrpConfiguredHoldTime
OID (numeric): 1.3.6.1.4.1.9.9.106.1.2.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: If cHsrpGrpUseConfiguredTimers is true, cHsrpGrpConfiguredHoldTime is used when this router is an active router. Otherwise, the Holdtime learned from the current active router is used. All routers on a particular LAN segment should use the same Holdtime. Also, the Holdtime should be at least three times the value of the Hellotime and must be greater than the Hellotime.
What is cHsrpGrpConfiguredHoldTime?
Reports/sets the manually configured HSRP hold time used by this router when acting as active router for the group; all routers on the LAN segment should agree on this value.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.106 | ciscoHsrpMIB | CISCO-HSRP-MIB |
| 1.3.6.1.4.1.9.9.106.1 | ciscoHsrpMIBObjects | CISCO-HSRP-MIB |
| 1.3.6.1.4.1.9.9.106.1.2 | cHsrpGroup | CISCO-HSRP-MIB |
| 1.3.6.1.4.1.9.9.106.1.2.1 | cHsrpGrpTable | CISCO-HSRP-MIB |
| 1.3.6.1.4.1.9.9.106.1.2.1.1 | cHsrpGrpEntry | CISCO-HSRP-MIB |
| 1.3.6.1.4.1.9.9.106.1.2.1.1.8 | cHsrpGrpConfiguredHoldTime | CISCO-HSRP-MIB |