All MIBs › CISCO-HEALTH-MONITOR-MIB › ciscoHealthMonitorHealthNotifyLowThreshold
ciscoHealthMonitorHealthNotifyLowThreshold
Module: CISCO-HEALTH-MONITOR-MIB
OID (symbolic): CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyLowThreshold
OID (numeric): 1.3.6.1.4.1.9.9.243.1.1.1.5
Node type: OBJECT-TYPE
Type: HealthLevel
Access: read-write
Description: Specifies the health level at which a ciscoHealthMonitorHealthLevel notification will be generated for the specified subsystem and entity. A notification will only be generated if the health level had previously reached the high threshold level prior to reaching this low threshold level. Health levels oscillating within the high and the low threshold levels do not generate notifications. A health level going from high threshold (or above) to low threshold (or below) represents a deterioration of the health for the specified subsystem. Set your unacceptable health level to this threshold.
What is ciscoHealthMonitorHealthNotifyLowThreshold?
Sets the health level at which a health-level notification is sent for a subsystem/entity, firing only after the health had previously risen to the high threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.243.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyLowThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.243.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyLowThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.243.1.1.1.5.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ciscoHealthMonitorHealthNotifyLowThreshold.1
Start monitoring Cisco IOS/IOS-XE platforms with embedded server/application subsystems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyLowThreshold OID value, configure state conditions and alerts, and monitor any Cisco IOS/IOS-XE platforms with embedded server/application subsystems from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1 | ciscoHealthMonitorMIBObjects | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1.1 | ciscoHealthMonitorTable | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1.1.1 | ciscoHealthMonitorEntry | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1.1.1.5 | ciscoHealthMonitorHealthNotifyLowThreshold | CISCO-HEALTH-MONITOR-MIB |