All MIBs › CISCO-HEALTH-MONITOR-MIB › ciscoHealthMonitorHealthNotifyHighThreshold
ciscoHealthMonitorHealthNotifyHighThreshold
Module: CISCO-HEALTH-MONITOR-MIB
OID (symbolic): CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyHighThreshold
OID (numeric): 1.3.6.1.4.1.9.9.243.1.1.1.4
Node type: OBJECT-TYPE
Type: HealthLevel
Access: read-write
Description: Specifies the health level at which a ciscoHealthMonitorHealthLevel notification will be generated for the specified subsystem and entity. A notification will only be generated if the health level had previously reached the low threshold level prior to reaching this high threshold level. Health levels oscillating within the high and the low threshold levels do not generate notifications. A health level going from low threshold (or below) to high threshold (or above) represents a return to normal health for the specified subsystem. Set your optimal health level to this threshold.
What is ciscoHealthMonitorHealthNotifyHighThreshold?
Sets the health level at which a health-level notification is sent for a subsystem/entity, firing only after the health had previously dropped to the low threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.243.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyHighThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.243.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyHighThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.243.1.1.1.4.1 s <value>
Start monitoring Cisco IOS/IOS-XE platforms with embedded server/application subsystems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-HEALTH-MONITOR-MIB::ciscoHealthMonitorHealthNotifyHighThreshold OID value, configure state conditions and alerts, and monitor any Cisco IOS/IOS-XE platforms with embedded server/application subsystems from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1 | ciscoHealthMonitorMIBObjects | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1.1 | ciscoHealthMonitorTable | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1.1.1 | ciscoHealthMonitorEntry | CISCO-HEALTH-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.243.1.1.1.4 | ciscoHealthMonitorHealthNotifyHighThreshold | CISCO-HEALTH-MONITOR-MIB |