CISCO-HC-ALARM-MIB :: cHcAlarmFallingThreshAbsValueHi

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-HC-ALARM-MIB › cHcAlarmFallingThreshAbsValueHi

cHcAlarmFallingThreshAbsValueHi

Module: CISCO-HC-ALARM-MIB

OID (symbolic): CISCO-HC-ALARM-MIB::cHcAlarmFallingThreshAbsValueHi

OID (numeric): 1.3.6.1.4.1.9.10.93.1.1.1.1.12

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: The upper 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the cHcAlarmFallingThreshAbsValueLo and cHcAlarmFallingThrsholdValStatus objects, as follows:

ABS(threshold) = cHcAlarmFallingThreshAbsValueLo + (cHcAlarmFallingThreshAbsValueHi * 2^^32)

The absolute value of the threshold is adjusted as required, as described in the CHcValueStatus textual convention. These three object instances are conceptually combined to represent the falling threshold for this entry.

When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated cHcAlarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3).

After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the threshold identified by the cHcAlarmRisingThreshAbsValueLo, cHcAlarmRisingThreshAbsValueHi, and cHcAlarmRisingThresholdValStatus objects.

This object may not be modified if the associated cHcAlarmStatus object is equal to active(1).

What is cHcAlarmFallingThreshAbsValueHi?

Reports the upper 32 bits of a high-capacity alarm's absolute falling threshold value, combined with the Lo and value-status objects to form the full threshold that triggers a falling alarm when crossed.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.93ciscoHcAlarmMIBCISCO-HC-ALARM-MIB
1.3.6.1.4.1.9.10.93.1cHcAlarmObjectsCISCO-HC-ALARM-MIB
1.3.6.1.4.1.9.10.93.1.1cHcAlarmControlObjectsCISCO-HC-ALARM-MIB
1.3.6.1.4.1.9.10.93.1.1.1cHcAlarmTableCISCO-HC-ALARM-MIB
1.3.6.1.4.1.9.10.93.1.1.1.1cHcAlarmEntryCISCO-HC-ALARM-MIB
1.3.6.1.4.1.9.10.93.1.1.1.1.12cHcAlarmFallingThreshAbsValueHiCISCO-HC-ALARM-MIB