CISCO-ENTITY-PERFORMANCE-MIB :: cepConfigRisingThreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-ENTITY-PERFORMANCE-MIB › cepConfigRisingThreshold

cepConfigRisingThreshold

Module: CISCO-ENTITY-PERFORMANCE-MIB

OID (symbolic): CISCO-ENTITY-PERFORMANCE-MIB::cepConfigRisingThreshold

OID (numeric): 1.3.6.1.4.1.9.9.756.1.2.1.4

Node type: OBJECT-TYPE

Type: CiscoEntPerfMeasurement

Access: read-write

Description: This object contains the rising threshold value for a specific performance measurement type at a specific performance time interval. The value of this object must be greater than cepConfigFallingThreshold.

The supported range of this object can be identified by the object 'cepConfigPerfRange'.

The value of zero indicates that no comparison is being made between the cepStatsMeasurement object value and the threshold value, therefore no event action will be generated.

What is cepConfigRisingThreshold?

A configurable rising threshold for a specific performance measurement over a given time interval; it must be set higher than the corresponding falling threshold and triggers a notification when crossed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.756.1.2.1.4
snmpwalk -v2c -c public <target> CISCO-ENTITY-PERFORMANCE-MIB::cepConfigRisingThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.756.1.2.1.4.1
snmpget -v2c -c public <target> CISCO-ENTITY-PERFORMANCE-MIB::cepConfigRisingThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.756.1.2.1.4.1 s <value>

Start monitoring Cisco routers/switches with modular hardware (line cards, supervisors) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENTITY-PERFORMANCE-MIB::cepConfigRisingThreshold OID value, configure state conditions and alerts, and monitor any Cisco routers/switches with modular hardware (line cards, supervisors) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.756ciscoEntityPerformanceMIBCISCO-ENTITY-PERFORMANCE-MIB
1.3.6.1.4.1.9.9.756.1ciscoEntityPerformanceMIBObjectsCISCO-ENTITY-PERFORMANCE-MIB
1.3.6.1.4.1.9.9.756.1.2cepConfigTableCISCO-ENTITY-PERFORMANCE-MIB
1.3.6.1.4.1.9.9.756.1.2.1cepConfigEntryCISCO-ENTITY-PERFORMANCE-MIB
1.3.6.1.4.1.9.9.756.1.2.1.4cepConfigRisingThresholdCISCO-ENTITY-PERFORMANCE-MIB