All MIBs › CISCO-CPRI-MIB › coiCpriControllerAlarmStatus
coiCpriControllerAlarmStatus
Module: CISCO-CPRI-MIB
OID (symbolic): CISCO-CPRI-MIB::coiCpriControllerAlarmStatus
OID (numeric): 1.3.6.1.4.1.9.9.9999.1.1.1.1.9
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates the current defect status of the cpri controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS alarm condition is detected on the CPRI Rx side. lof(2): LOF (Loss Of Frame). This bit will be set when LOF alarm condition is detected on the CPRI Rx side. rai(3): RAI (Remote Alarm Indication). This bit will be set when RAI alarm condition reported in a control word. sdi(4): SDI (SAP Defect Indication). This bit will be set when SDI alarm condition reported in a control word.
What is coiCpriControllerAlarmStatus?
Reports the current defect/alarm status of the CPRI controller, such as no alarm or a Loss of Signal (LOS) condition, as a set of status bits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.9999.1.1.1.1.9 snmpwalk -v2c -c public <target> CISCO-CPRI-MIB::coiCpriControllerAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.9999.1.1.1.1.9.1 snmpget -v2c -c public <target> CISCO-CPRI-MIB::coiCpriControllerAlarmStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> coiCpriControllerAlarmStatus.1
Start monitoring Cisco mobile fronthaul / RAN aggregation equipment (CPRI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CPRI-MIB::coiCpriControllerAlarmStatus OID value, configure state conditions and alerts, and monitor any Cisco mobile fronthaul / RAN aggregation equipment (CPRI) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.9999 | ciscoAal5ExtMIB | CISCO-AAL5-EXT-MIB |
| 1.3.6.1.4.1.9.9.9999.1 | ciscoAal5ExtMIBObjects | CISCO-AAL5-EXT-MIB |
| 1.3.6.1.4.1.9.9.9999.1.1 | cAal5ExtConnections | CISCO-AAL5-EXT-MIB |
| 1.3.6.1.4.1.9.9.9999.1.1.1 | cAal5ExtVccTable | CISCO-AAL5-EXT-MIB |
| 1.3.6.1.4.1.9.9.9999.1.1.1.1 | cAal5ExtVccEntry | CISCO-AAL5-EXT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.9999.1.1.1.1.9 | coiCpriControllerAlarmStatus | CISCO-CPRI-MIB |