All MIBs › CISCO-COPS-CLIENT-MIB › ccopsIfRoleCombination
ccopsIfRoleCombination
Module: CISCO-COPS-CLIENT-MIB
OID (symbolic): CISCO-COPS-CLIENT-MIB::ccopsIfRoleCombination
OID (numeric): 1.3.6.1.4.1.9.9.140.1.1.10.1.1
Node type: OBJECT-TYPE
Type: CopsRoleCombination
Access: read-write
Description: A display string, role combination, that is associated with an interface. This is the administratively-desired role combination which represents roles that are currently set by the administrator for a particular interface in the COPS domain.
If copsMaxRoleCombination is one, the new role will be applied to all interfaces which support COPS feature on the device. Agent returns inconsistentValue if this role does not exist in ccopsRoleTable, resourceUnavailable if the role combination exceeds copsMaxRoleCombination in the device, wrongValue if a non-lexicographically-ordered value is written to it.
On some platforms, roles may be assigned per port group rather than per port. If multiple ports belong to a port group, the role combination assigned to any of the ports in such group will apply to all ports in the same group.
On some platforms, there can be a single role combination for the entire device. The role combination assigned to any of the interfaces will apply to all interfaces which support COPS feature in the device.
What is ccopsIfRoleCombination?
Configures the administrator-assigned role combination string associated with an interface in the COPS domain.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.140.1.1.10.1.1 snmpwalk -v2c -c public <target> CISCO-COPS-CLIENT-MIB::ccopsIfRoleCombination
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.140.1.1.10.1.1.1 snmpget -v2c -c public <target> CISCO-COPS-CLIENT-MIB::ccopsIfRoleCombination.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.140.1.1.10.1.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ccopsIfRoleCombination.1
Start monitoring Cisco router/switch (COPS client/PEP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-COPS-CLIENT-MIB::ccopsIfRoleCombination OID value, configure state conditions and alerts, and monitor any Cisco router/switch (COPS client/PEP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | CISCO-COPS-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.140.1 | ccopsMIBObjects | CISCO-COPS-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.140.1.1 | ccopsGlobalObjects | CISCO-COPS-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.140.1.1.10 | ccopsIfTable | CISCO-COPS-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.140.1.1.10.1 | ccopsIfEntry | CISCO-COPS-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.140.1.1.10.1.1 | ccopsIfRoleCombination | CISCO-COPS-CLIENT-MIB |