CISCO-CDL-MIB :: coCdlRxInvalidFlowID

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-CDL-MIB › coCdlRxInvalidFlowID

coCdlRxInvalidFlowID

Module: CISCO-CDL-MIB

OID (symbolic): CISCO-CDL-MIB::coCdlRxInvalidFlowID

OID (numeric): 1.3.6.1.4.1.9.10.88.1.1.1.1.13

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object counts the number of CDL Flow Identifier lookup errors in the receive direction. When a CDL interface multiplexes/demultiplexes more than one elementary packet stream, it uses the flow identifier in the CDL header. This error counter is incremented when a flow identifier value received on this interface does not map to any of the elementary packet streams demultiplexed by this interface.

This object represents the lower word value of the counter associated with the number of CDL Flow Identifier lookup errors encountered in the receive direction.

NOTE: The object coCdlRxInvalidFlowIDOverflow contains the higher 32 bits of this counter value. SNMP v2c or v3 managers can use the coCdlHCRxInvalidFlowID object directly which is a 64 bit counter.

What is coCdlRxInvalidFlowID?

Counts CDL flow identifier lookup errors encountered in the receive direction when demultiplexing elementary packet streams on this interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.88.1.1.1.1.13
snmpwalk -v2c -c public <target> CISCO-CDL-MIB::coCdlRxInvalidFlowID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.88.1.1.1.1.13.1
snmpget -v2c -c public <target> CISCO-CDL-MIB::coCdlRxInvalidFlowID.1

Start monitoring Cisco optical/Ethernet transport node (Converged Data Link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CDL-MIB::coCdlRxInvalidFlowID OID value, configure state conditions and alerts, and monitor any Cisco optical/Ethernet transport node (Converged Data Link) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.88ciscoCdlMIBCISCO-CDL-MIB
1.3.6.1.4.1.9.10.88.1coCdlMIBObjectsCISCO-CDL-MIB
1.3.6.1.4.1.9.10.88.1.1coCdlBaseGroupCISCO-CDL-MIB
1.3.6.1.4.1.9.10.88.1.1.1coCdlIntfTableCISCO-CDL-MIB
1.3.6.1.4.1.9.10.88.1.1.1.1coCdlIntfEntryCISCO-CDL-MIB
1.3.6.1.4.1.9.10.88.1.1.1.1.13coCdlRxInvalidFlowIDCISCO-CDL-MIB