All MIBs › CISCO-CDL-MIB › coCdlDINotifyThrottleInterval
coCdlDINotifyThrottleInterval
Module: CISCO-CDL-MIB
OID (symbolic): CISCO-CDL-MIB::coCdlDINotifyThrottleInterval
OID (numeric): 1.3.6.1.4.1.9.10.88.1.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The minimum time interval between generation of successive CDL defect indication 'notification-events' by this agent. A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations.
If more than one change occurs within a short time span, for for example if hop-by-hop forward defect indications are received for multiple interfaces, then notification-events for these changes should be deferred by the agent so that each notification-event occurs at least one throttle interval after the previous notification-event. At the end of each throttle interval, one notification-event should be generated if the current defect indication state on any interface is different from the last state indicated in a notification-event. In such a case, another throttle interval is started immediately.
What is coCdlDINotifyThrottleInterval?
A read-write setting for the minimum time between successive CDL defect indication notification events sent by the agent, limiting trap flooding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.88.1.1.5 snmpwalk -v2c -c public <target> CISCO-CDL-MIB::coCdlDINotifyThrottleInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.88.1.1.5.1 snmpget -v2c -c public <target> CISCO-CDL-MIB::coCdlDINotifyThrottleInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.88.1.1.5.1 i <value>
Start monitoring Cisco optical/Ethernet transport node (Converged Data Link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CDL-MIB::coCdlDINotifyThrottleInterval OID value, configure state conditions and alerts, and monitor any Cisco optical/Ethernet transport node (Converged Data Link) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.88 | ciscoCdlMIB | CISCO-CDL-MIB |
| 1.3.6.1.4.1.9.10.88.1 | coCdlMIBObjects | CISCO-CDL-MIB |
| 1.3.6.1.4.1.9.10.88.1.1 | coCdlBaseGroup | CISCO-CDL-MIB |
| 1.3.6.1.4.1.9.10.88.1.1.5 | coCdlDINotifyThrottleInterval | CISCO-CDL-MIB |