CISCO-C2900-MIB :: c2900PortStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-C2900-MIBc2900PortStatus

c2900PortStatus

Module: CISCO-C2900-MIB

OID (symbolic): CISCO-C2900-MIB::c2900PortStatus

OID (numeric): 1.3.6.1.4.1.9.9.87.1.4.1.1.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the switch has detected a port that is malfunctioning it will place that port into the broken(10) state. For ports which are disabled(see dot1dStpPortEnable), this object will have a value of disabled(2). Since the switch implements three additional states which are not part of IEEE Standard, these additional states are possible values for c2900PortStaus. The additional states are preforwarding(6), secureforwarding(8), and suspended(9). Note: except for these additional states, this object is the same as the dot1dStpPortState object. Default value: blocking(2).

This object is only supported for static VLAN access ports.

What is c2900PortStatus?

A read-only indicator of a port's current Spanning Tree Protocol state, which governs how the port handles incoming frames and flags ports the switch has detected as malfunctioning (broken).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.87.1.4.1.1.22
snmpwalk -v2c -c public <target> CISCO-C2900-MIB::c2900PortStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.87.1.4.1.1.22.1
snmpget -v2c -c public <target> CISCO-C2900-MIB::c2900PortStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> c2900PortStatus.1

Start monitoring Cisco Catalyst 2900 series switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-C2900-MIB::c2900PortStatus OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 2900 series switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.87ciscoC2900MIBCISCO-C2900-MIB
1.3.6.1.4.1.9.9.87.1c2900MIBObjectsCISCO-C2900-MIB
1.3.6.1.4.1.9.9.87.1.4c2900PortCISCO-C2900-MIB
1.3.6.1.4.1.9.9.87.1.4.1c2900PortTableCISCO-C2900-MIB
1.3.6.1.4.1.9.9.87.1.4.1.1c2900PortEntryCISCO-C2900-MIB
1.3.6.1.4.1.9.9.87.1.4.1.1.22c2900PortStatusCISCO-C2900-MIB