CISCO-BERT-MIB :: cbOperStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-BERT-MIB › cbOperStatus

cbOperStatus

Module: CISCO-BERT-MIB

OID (symbolic): CISCO-BERT-MIB::cbOperStatus

OID (numeric): 1.3.6.1.4.1.9.9.185.1.1.1.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object shows the status of BERT in the shelf. The values for this object are valid only when cbRowStatus contains active(1).

Possible values for this object:

success(1) : BERT is successfully completed.

inSync(2) : BERT is activated and receive side is synchronized with the incoming sequence of patterns.

outOfSync(3) : BERT is activated, but receive is out of synchronization with the incoming sequence. Criteria for out of synchronization state is defined in ITU document O.150.

inLoopback(4): loopback establish or de-establish in progress. The type of loopback can be determined by cbLoopback.

clockOutOfSync(5): When the send and receive clocks are not synchronized.

bertFailed(6): BERT failed. The cbFailedReason object contains the reason for the failure.

What is cbOperStatus?

This read-only object reports the current operational status of a BERT test on the shelf (e.g., success, in sync, or failed), and is only meaningful while the corresponding row is active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.185.1.1.1.1.10
snmpwalk -v2c -c public <target> CISCO-BERT-MIB::cbOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.185.1.1.1.1.10.1
snmpget -v2c -c public <target> CISCO-BERT-MIB::cbOperStatus.1

Start monitoring Cisco router/access server with T1/E1/T3 WAN interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BERT-MIB::cbOperStatus OID value, configure state conditions and alerts, and monitor any Cisco router/access server with T1/E1/T3 WAN interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.185ciscoBertMIBCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1ciscoBertMIBObjectsCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1ciscoBertConfigCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1.1cbConfTableCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1.1.1cbConfEntryCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1.1.1.10cbOperStatusCISCO-BERT-MIB