CISCO-BERT-MIB :: cbDS0DPCodeIteration

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-BERT-MIB › cbDS0DPCodeIteration

cbDS0DPCodeIteration

Module: CISCO-BERT-MIB

OID (symbolic): CISCO-BERT-MIB::cbDS0DPCodeIteration

OID (numeric): 1.3.6.1.4.1.9.9.185.1.1.1.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Valid only with cbLoopbackCode = latchDS0Drop. DSP-OP devices can be cross connected in the central office in a daisy chain. By this, the user has capability to put any of the devices in the chain in loopback mode. A value of 1 results in no iteration and will cause the very first device in chain to go into loop back. A value of 2 will result into one iteration and will cause the second device to go into loopback and so on. This tests the channels across multiple devices connected in a chain.

What is cbDS0DPCodeIteration?

This read-write object, valid only when cbLoopbackCode is set to latchDS0Drop, controls how many times the loopback activation code iterates through a daisy-chained set of central-office DSP-OP devices, with a value of 1 meaning no iteration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.185.1.1.1.1.13
snmpwalk -v2c -c public <target> CISCO-BERT-MIB::cbDS0DPCodeIteration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.185.1.1.1.1.13.1
snmpget -v2c -c public <target> CISCO-BERT-MIB::cbDS0DPCodeIteration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.185.1.1.1.1.13.1 i <value>

Start monitoring Cisco router/access server with T1/E1/T3 WAN interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BERT-MIB::cbDS0DPCodeIteration OID value, configure state conditions and alerts, and monitor any Cisco router/access server with T1/E1/T3 WAN interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.185ciscoBertMIBCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1ciscoBertMIBObjectsCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1ciscoBertConfigCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1.1cbConfTableCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1.1.1cbConfEntryCISCO-BERT-MIB
1.3.6.1.4.1.9.9.185.1.1.1.1.13cbDS0DPCodeIterationCISCO-BERT-MIB