All MIBs › CISCO-BCP-MIB › bcpConfigTinygram
bcpConfigTinygram
Module: CISCO-BCP-MIB
OID (symbolic): CISCO-BCP-MIB::bcpConfigTinygram
OID (numeric): 1.3.6.1.4.1.9.9.275.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Tinygram-Compression configuration option permits implementations to indicate support for Tinygram Compression.
When enabled the local BCP Entity initiates a Tinygram-Compression Option negotiation.
What is bcpConfigTinygram?
This read-write object controls whether the local BCP entity negotiates the Tinygram-Compression option, which permits implementations to indicate support for compressing very small Ethernet frames before sending them over the WAN link. Enabling this lets both half-bridges agree to strip the padding normally used to pad small frames up to Ethernet's minimum size, which mainly matters on slow WAN links carrying a lot of small, ack-sized frames where that padding overhead is proportionally significant. A low-bandwidth serial link bridging a segment with lots of small acknowledgment-sized frames would benefit noticeably from enabling this, while a fast link would barely notice the difference.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.275.1.2.1.7 snmpwalk -v2c -c public <target> CISCO-BCP-MIB::bcpConfigTinygram
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.275.1.2.1.7.1 snmpget -v2c -c public <target> CISCO-BCP-MIB::bcpConfigTinygram.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.275.1.2.1.7.1 i <value>
Start monitoring Cisco router/access server with PPP WAN interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BCP-MIB::bcpConfigTinygram OID value, configure state conditions and alerts, and monitor any Cisco router/access server with PPP WAN interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | CISCO-BCP-MIB |
| 1.3.6.1.4.1.9.9.275.1 | ciscoBcpMIBObjects | CISCO-BCP-MIB |
| 1.3.6.1.4.1.9.9.275.1.2 | bcpConfigTable | CISCO-BCP-MIB |
| 1.3.6.1.4.1.9.9.275.1.2.1 | bcpConfigEntry | CISCO-BCP-MIB |
| 1.3.6.1.4.1.9.9.275.1.2.1.7 | bcpConfigTinygram | CISCO-BCP-MIB |