CISCO-BCP-MIB :: bcpConfigLineId

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-BCP-MIB › bcpConfigLineId

bcpConfigLineId

Module: CISCO-BCP-MIB

OID (symbolic): CISCO-BCP-MIB::bcpConfigLineId

OID (numeric): 1.3.6.1.4.1.9.9.275.1.2.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The LAN segment number of the local BCP entity.

This value is meaningful only when the local BCP entity negotiated the LineId Configuration option, which means the value of bcpConfigLineIdControl is enabled(1).

The two half bridges must agree on the LAN segment number.

What is bcpConfigLineId?

This read-write value holds the LAN segment number of the local BCP entity, meaningful only when bcpConfigLineIdControl is enabled, and the two half bridges must agree on the same number. Like bcpConfigBridgeId, this value is meaningless until that option is actually enabled, and a mismatched value between the two ends is the specific failure mode to check when line-identification negotiation won't complete despite the link layer being up. One half-bridge configured with a LineId of 12 and its peer left at a default of 0 would fail to negotiate this option even though both ends have it enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.275.1.2.1.4
snmpwalk -v2c -c public <target> CISCO-BCP-MIB::bcpConfigLineId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.275.1.2.1.4.1
snmpget -v2c -c public <target> CISCO-BCP-MIB::bcpConfigLineId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.275.1.2.1.4.1 i <value>

Start monitoring Cisco router/access server with PPP WAN interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BCP-MIB::bcpConfigLineId OID value, configure state conditions and alerts, and monitor any Cisco router/access server with PPP WAN interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.275ciscoBcpMIBCISCO-BCP-MIB
1.3.6.1.4.1.9.9.275.1ciscoBcpMIBObjectsCISCO-BCP-MIB
1.3.6.1.4.1.9.9.275.1.2bcpConfigTableCISCO-BCP-MIB
1.3.6.1.4.1.9.9.275.1.2.1bcpConfigEntryCISCO-BCP-MIB
1.3.6.1.4.1.9.9.275.1.2.1.4bcpConfigLineIdCISCO-BCP-MIB