All MIBs › CISCO-ATM-SWITCH-FR-RM-MIB › cfaAdapterIfVcQOutqMarkThresh
cfaAdapterIfVcQOutqMarkThresh
Module: CISCO-ATM-SWITCH-FR-RM-MIB
OID (symbolic): CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqMarkThresh
OID (numeric): 1.3.6.1.4.1.9.9.110.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the Marking threshold applied to the Frame Relay - ATM interworking virtual circuit output queue, on the Frame Relay PAM.
The output queue is in the direction of the ATM switch fabric to the Frame Relay/FUNI interface.
If the fill level of the output queue for the Frame Relay - ATM interworking virtual circuit exceeds this threshold, the following will happen:
1. For frames coming into the Frame Relay - ATM interworking virtual circuit from the Frame Relay side, the frame will have the BECN bit set in the Frame Relay header before getting converted to cells and entering the ATM switch fabric.
2. For cells arriving from the ATM switch fabric side for this Frame Relay - ATM interworking virtual circuit, the corresponding frames will have the Forward Explicit Congestion Notification (FECN) bit set in the Frame Relay header upon exiting the Frame Relay interface. For FUNI - ATM interworking connections, the Congestion Notification (CN) bit gets set in the FUNI header.
The threshold value is expressed as a percent-of-full. Setting this object to 100 effectively turns off the threshold.
What is cfaAdapterIfVcQOutqMarkThresh?
This read-write value sets the congestion-marking threshold for the output queue on a Frame Relay-to-ATM interworking virtual circuit, in the direction from the ATM switch fabric toward the Frame Relay/FUNI interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqMarkThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqMarkThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.5.1 i <value>
Start monitoring Cisco ATM/Frame Relay interworking switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqMarkThresh OID value, configure state conditions and alerts, and monitor any Cisco ATM/Frame Relay interworking switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1 | ciscoAtmSwitchFrRmMIBObjects | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1 | cfaAdapter | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1 | cfaAdapterIfVcQThresholdTable | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1 | cfaAdapterIfVcQThresholdEntry | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.5 | cfaAdapterIfVcQOutqMarkThresh | CISCO-ATM-SWITCH-FR-RM-MIB |