All MIBs › CISCO-ATM-SWITCH-FR-RM-MIB › cfaAdapterIfVcQOutqDiscThresh
cfaAdapterIfVcQOutqDiscThresh
Module: CISCO-ATM-SWITCH-FR-RM-MIB
OID (symbolic): CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqDiscThresh
OID (numeric): 1.3.6.1.4.1.9.9.110.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the Discard Eligible threshold applied to the Frame Relay - ATM interworking virtual circuit output queue, on the Frame Relay PAM.
The output queue is in the direction of the ATM switch fabric to the Frame Relay/FUNI interface.
If the fill level of the output queue for the Frame Relay - ATM interworking virtual circuit exceeds this threshold, all frames arriving on this virtual circuit from the ATM switch fabric side will be discarded if the arriving frame has its Discard Eligible bit set.
The threshold value is expressed as a percent-of-full. Setting this object to 100 effectively turns off the threshold.
What is cfaAdapterIfVcQOutqDiscThresh?
This read-write value sets the discard-eligible threshold for the output queue on a Frame Relay-to-ATM interworking virtual circuit, applied in the direction from the ATM switch fabric toward the Frame Relay/FUNI interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqDiscThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqDiscThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.3.1 i <value>
Start monitoring Cisco ATM/Frame Relay interworking switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQOutqDiscThresh OID value, configure state conditions and alerts, and monitor any Cisco ATM/Frame Relay interworking switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1 | ciscoAtmSwitchFrRmMIBObjects | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1 | cfaAdapter | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1 | cfaAdapterIfVcQThresholdTable | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1 | cfaAdapterIfVcQThresholdEntry | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.3 | cfaAdapterIfVcQOutqDiscThresh | CISCO-ATM-SWITCH-FR-RM-MIB |