All MIBs › CISCO-ATM-SWITCH-FR-RM-MIB › cfaAdapterIfVcQInqMarkThresh
cfaAdapterIfVcQInqMarkThresh
Module: CISCO-ATM-SWITCH-FR-RM-MIB
OID (symbolic): CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqMarkThresh
OID (numeric): 1.3.6.1.4.1.9.9.110.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the Marking threshold applied to the Frame Relay - ATM interworking virtual circuit input queue, on the Frame Relay PAM.
The input queue is in the direction of Frame Relay/FUNI interface to the ATM switch fabric.
If the fill level of the input queue for the Frame Relay - ATM interworking virtual circuit exceeds this threshold, the following will happen:
1. For frames coming into the Frame Relay - ATM interworking virtual circuit from the Frame Relay side, the corresponding cells will have the Explicit Forward Congestion Indication (EFCI) bit set in the ATM cell header, on entry into the ATM switch fabric.
2. For cells arriving from the ATM switch fabric side for this Frame Relay - ATM interworking virtual circuit, the corresponding frames will have the Backward Explicit Congestion Notification (BECN) bit set upon exiting the Frame Relay interface.
The threshold value is expressed as a percent-of-full. Setting this object to 100 effectively turns off the threshold.
What is cfaAdapterIfVcQInqMarkThresh?
This read-write value sets the congestion-marking threshold for the input queue on a Frame Relay-to-ATM interworking virtual circuit, in the direction from the Frame Relay/FUNI interface toward the ATM switch fabric.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqMarkThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqMarkThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.4.1 i <value>
Start monitoring Cisco ATM/Frame Relay interworking switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqMarkThresh OID value, configure state conditions and alerts, and monitor any Cisco ATM/Frame Relay interworking switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1 | ciscoAtmSwitchFrRmMIBObjects | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1 | cfaAdapter | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1 | cfaAdapterIfVcQThresholdTable | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1 | cfaAdapterIfVcQThresholdEntry | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.4 | cfaAdapterIfVcQInqMarkThresh | CISCO-ATM-SWITCH-FR-RM-MIB |