All MIBs › CISCO-ATM-SWITCH-FR-RM-MIB › cfaAdapterIfVcQInqDiscThresh
cfaAdapterIfVcQInqDiscThresh
Module: CISCO-ATM-SWITCH-FR-RM-MIB
OID (symbolic): CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqDiscThresh
OID (numeric): 1.3.6.1.4.1.9.9.110.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the Discard Eligible threshold applied to the Frame Relay - ATM interworking virtual circuit input queue, on the Frame Relay PAM.
The input queue is in the direction of Frame Relay/FUNI interface to the ATM switch fabric.
If the fill level of the input queue for the Frame Relay - ATM interworking virtual circuit exceeds this threshold, all frames arriving on this virtual circuit from the Frame Relay side will be discarded at the interface if the arriving frame has its Discard Eligible bit set.
The threshold value is expressed as a percent-of-full. Setting this object to 100 effectively turns off the threshold.
What is cfaAdapterIfVcQInqDiscThresh?
This read-write value sets the discard-eligible cell/frame threshold for the input queue on a Frame Relay-to-ATM interworking virtual circuit, applied in the direction from the Frame Relay/FUNI interface toward the ATM switch fabric.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqDiscThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqDiscThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.110.1.1.1.1.2.1 i <value>
Start monitoring Cisco ATM/Frame Relay interworking switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-SWITCH-FR-RM-MIB::cfaAdapterIfVcQInqDiscThresh OID value, configure state conditions and alerts, and monitor any Cisco ATM/Frame Relay interworking switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1 | ciscoAtmSwitchFrRmMIBObjects | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1 | cfaAdapter | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1 | cfaAdapterIfVcQThresholdTable | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1 | cfaAdapterIfVcQThresholdEntry | CISCO-ATM-SWITCH-FR-RM-MIB |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.2 | cfaAdapterIfVcQInqDiscThresh | CISCO-ATM-SWITCH-FR-RM-MIB |