CISCO-ATM-RM-MIB :: rtsIfVbrClassMaxThrshRequested

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrtsIfVbrClassMaxThrshRequested

rtsIfVbrClassMaxThrshRequested

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rtsIfVbrClassMaxThrshRequested

OID (numeric): 1.3.6.1.4.1.9.10.10.1.10.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the VBR Traffic Class. The value of this object is expressed as a percent of the value of rtsIfMaxThreshold object. A set request for this object will succeed only if the value of the ifAdminStatus object for this interface is 'down'. The Traffic Shaping hardware may not have the support to represent all the values and hence the value installed in hardware could be different. And the value installed in hardware will be available through the object rtsIfVbrClassMaxThrshInstalled. This object is not instantiated for interfaces to which it cannot be applied.

What is rtsIfVbrClassMaxThrshRequested?

A read-write value specifying the desired Maximum Cell Buffer Threshold for the VBR traffic class, expressed as a percentage of rtsIfMaxThreshold.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.7
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfVbrClassMaxThrshRequested

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.7.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfVbrClassMaxThrshRequested.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.7.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rtsIfVbrClassMaxThrshRequested OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10ciscoAtmRmTrafShaperIfCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10.1rmTrafficShaperIfTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10.1.1rmTrafficShaperIfEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10.1.1.7rtsIfVbrClassMaxThrshRequestedCISCO-ATM-RM-MIB