All MIBs › CISCO-ATM-RM-MIB › rtsIfVbrCfgRequested
rtsIfVbrCfgRequested
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rtsIfVbrCfgRequested
OID (numeric): 1.3.6.1.4.1.9.10.10.1.10.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object is set to the value 'shapingDisable', VBR connections(VC or VP) on this interface will not be shaped. If the object is set to the value 'shapeToScrAndPcr', the VBR (VC or VP) connections on this interface will be shaped to conform to their respective SCR, PCR and MBS traffic parameters. If this object is set to the value 'shapeToPcr', the VBR (VC or VP) connections on this interface will be shaped to conform to their respective PCR traffic parameter. Depending on the capabilities of the traffic shaping hardware, the changes to the traffic shaping configuration may or may not take effect immediately and may require that the traffic shaping hardware be reset to effect the change. The value of the object rtsIfVbrCfgInstalled will reflect the actual VBR Traffic Shaping configuration installed in the hardware currently. Depending on the capabilities of the traffic shaping hardware, the value of this object may or may not apply to terminating VBR VPs on this interface. This object is not instantiated for interfaces to which it cannot be applied.
What is rtsIfVbrCfgRequested?
A read-write setting that requests whether VBR (variable bit rate) connections on this interface should be traffic-shaped (e.g., disabled or shaped to conform to SCR/PCR).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.3 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfVbrCfgRequested
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.3.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfVbrCfgRequested.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.3.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rtsIfVbrCfgRequested OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10 | ciscoAtmRmTrafShaperIf | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1 | rmTrafficShaperIfTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1 | rmTrafficShaperIfEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.3 | rtsIfVbrCfgRequested | CISCO-ATM-RM-MIB |