All MIBs › CISCO-ATM-RM-MIB › rtsIfBeVcMaxThrshRequested
rtsIfBeVcMaxThrshRequested
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rtsIfBeVcMaxThrshRequested
OID (numeric): 1.3.6.1.4.1.9.10.10.1.10.1.1.13
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object reflects the Maximum Threshold of the per-connection queues of best-effort connections(VCs or VPs) in the traffic shaping hardware. The value of this object is expressed in number of cell buffers. Any change made to the value of this object will only effect subsequently established best-effort connections and will not impact already existing best-effort connections. The Traffic Shaping hardware may not have the support to represent all the values and hence the value installed in hardware could be different. And the value installed in hardware will be available through the object rtsIfBeVcMaxThrshInstalled. This object is not instantiated for interfaces to which it cannot be applied.
What is rtsIfBeVcMaxThrshRequested?
A read-write value requesting the Maximum Threshold (in cell buffers) for per-connection queues of individual Best-Effort VCs/VPs in the traffic shaping hardware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.13 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeVcMaxThrshRequested
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.13.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeVcMaxThrshRequested.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.13.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rtsIfBeVcMaxThrshRequested OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10 | ciscoAtmRmTrafShaperIf | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1 | rmTrafficShaperIfTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1 | rmTrafficShaperIfEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.13 | rtsIfBeVcMaxThrshRequested | CISCO-ATM-RM-MIB |