All MIBs › CISCO-ATM-RM-MIB › rtsIfBeClassMaxThrshRequested
rtsIfBeClassMaxThrshRequested
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rtsIfBeClassMaxThrshRequested
OID (numeric): 1.3.6.1.4.1.9.10.10.1.10.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the Best-Effort Traffic Class. The value of this object is expressed as a percent of the value of rtsIfMaxThreshold object. A set request for this object will succeed only if the value of the ifAdminStatus object for this interface is 'down'. The Traffic Shaping hardware may not have the support to represent all the values and hence the value installed in hardware could be different. And this installed value will be available through the object rtsIfBeClassMaxThrshInstalled. This object is not instantiated for interfaces to which it cannot be applied.
What is rtsIfBeClassMaxThrshRequested?
A read-write value specifying the desired Maximum Cell Buffer Threshold for the Best-Effort traffic class, expressed as a percentage of rtsIfMaxThreshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.9 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeClassMaxThrshRequested
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.9.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeClassMaxThrshRequested.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.9.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rtsIfBeClassMaxThrshRequested OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10 | ciscoAtmRmTrafShaperIf | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1 | rmTrafficShaperIfTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1 | rmTrafficShaperIfEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.9 | rtsIfBeClassMaxThrshRequested | CISCO-ATM-RM-MIB |