All MIBs › CISCO-ATM-RM-MIB › rtsIfBeCfgRequested
rtsIfBeCfgRequested
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rtsIfBeCfgRequested
OID (numeric): 1.3.6.1.4.1.9.10.10.1.10.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object reflects the traffic shaping configuration applied to Best-Effort Connections(VC or VP) belonging to UBR and ABR service categories on this interface. If this object is set to the value 'shapingDisable', best-effort connections(VC or VP) on this interface will not be shaped. If this object is set to the value 'shapeToPcr', the best-effort connections(VC or VP) on this interface will be shaped to conform to their respective PCR traffic parameter. Depending on the capabilities of the traffic shaping hardware, the changes to the traffic shaping configuration may or may not take effect immediately and may require that the traffic shaping hardware be reset to effect the change. The object rtsIfBeCfgInstalled will reflect the actual best-effort Traffic Shaping configuration installed in the hardware currently. Depending on the capabilities of the traffic shaping hardware, the value of this object may or may not apply to terminating best-effort VPs on this interface. This object is not instantiated for interfaces to which it cannot be applied.
What is rtsIfBeCfgRequested?
A read-write setting controlling whether traffic shaping is enabled for Best-Effort connections (UBR/ABR service categories) on this interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.5 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeCfgRequested
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.5.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeCfgRequested.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.5.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rtsIfBeCfgRequested OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10 | ciscoAtmRmTrafShaperIf | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1 | rmTrafficShaperIfTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1 | rmTrafficShaperIfEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.5 | rtsIfBeCfgRequested | CISCO-ATM-RM-MIB |