CISCO-ATM-RM-MIB :: rtsIfBeCfgInstalled

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrtsIfBeCfgInstalled

rtsIfBeCfgInstalled

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rtsIfBeCfgInstalled

OID (numeric): 1.3.6.1.4.1.9.10.10.1.10.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object reflects the current Best-Effort Traffic Shaping configuration installed in the hardware. This object is not instantiated for interfaces to which it cannot be applied.

What is rtsIfBeCfgInstalled?

Reports the read-only Best-Effort traffic shaping configuration currently installed in the interface's hardware.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.6
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeCfgInstalled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.10.1.1.6.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rtsIfBeCfgInstalled.1

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rtsIfBeCfgInstalled OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10ciscoAtmRmTrafShaperIfCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10.1rmTrafficShaperIfTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10.1.1rmTrafficShaperIfEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.10.1.1.6rtsIfBeCfgInstalledCISCO-ATM-RM-MIB