All MIBs › CISCO-ATM-RM-MIB › rmScDefaultQosPeakToPeakCdv
rmScDefaultQosPeakToPeakCdv
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmScDefaultQosPeakToPeakCdv
OID (numeric): 1.3.6.1.4.1.9.10.10.1.1.4.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The default Peak-to-peak cell delay variation (cdv) for the Service Category. It applies only to cbr and vbr-rt Service Categories. Specifying a value of 16777215 signifies that this parameter should not be checked during connection setup. The units of this object are microseconds.
What is rmScDefaultQosPeakToPeakCdv?
Read-write default peak-to-peak Cell Delay Variation (CDV) value applied to CBR and VBR-RT service categories, used as a QoS bound during connection setup unless overridden.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.1.4.1.3 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmScDefaultQosPeakToPeakCdv
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.1.4.1.3.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmScDefaultQosPeakToPeakCdv.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.1.4.1.3.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmScDefaultQosPeakToPeakCdv OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1 | ciscoAtmRmSwitchCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1.4 | rmDefaultQosObjectiveTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1.4.1 | rmDefaultQosObjectiveEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.3 | rmScDefaultQosPeakToPeakCdv | CISCO-ATM-RM-MIB |