All MIBs › CISCO-ATM-RM-MIB › rmScDefaultQosClr
rmScDefaultQosClr
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmScDefaultQosClr
OID (numeric): 1.3.6.1.4.1.9.10.10.1.1.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The default cell-loss-ratio for the Service Category (for CLP=0 cells only). Specifying a value of 0 signifies that this parameter should not be checked during connection setup. The units of this object are negative powers of ten (so an object value of 8 means 10**(-8)).
What is rmScDefaultQosClr?
Read-write default Cell Loss Ratio for CLP=0 cells in a given ATM service category, expressed as a negative power of ten, used during connection admission checks.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.1.4.1.4 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmScDefaultQosClr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.1.4.1.4.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmScDefaultQosClr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.1.4.1.4.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmScDefaultQosClr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1 | ciscoAtmRmSwitchCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1.4 | rmDefaultQosObjectiveTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1.4.1 | rmDefaultQosObjectiveEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.4 | rmScDefaultQosClr | CISCO-ATM-RM-MIB |