All MIBs › CISCO-ATM-RM-MIB › rmIfVbrRtDefaultRxUpcTolerance
rmIfVbrRtDefaultRxUpcTolerance
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfVbrRtDefaultRxUpcTolerance
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specifies the maximum burst size parameter used for policing of a receive cell-stream of a VBR-RT connection on an interface, if this parameter is not specified explicitly in the connection setup request. It is specified in cell-times. Note that a change to this value affects subsequent connection setup, not existing connections.
What is rmIfVbrRtDefaultRxUpcTolerance?
Read-write default maximum burst size parameter used to police incoming VBR-RT connection traffic on an interface when not explicitly specified at connection setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.7 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfVbrRtDefaultRxUpcTolerance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.7.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfVbrRtDefaultRxUpcTolerance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.7.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfVbrRtDefaultRxUpcTolerance OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.7 | rmIfVbrRtDefaultRxUpcTolerance | CISCO-ATM-RM-MIB |