All MIBs › CISCO-ATM-RM-MIB › rmIfVbrNrtPerClassOverbooking
rmIfVbrNrtPerClassOverbooking
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfVbrNrtPerClassOverbooking
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the Per Class Overbooking percentage for VBR-Nrt service category on this interface. If the value of this object is 100, Per Class Overbooking for VBR-Nrt is disabled on this interface. Specifying a value that is greater than 100 causes the CAC to scale down the bandwidth allocated to a VBR-Nrt VC on this interface by a factor that is equal to the inverse of the overbooking percentage specified by this object. A set request for this object will succeed only if the value of the ifAdminStatus object for this interface is 'down' and Interface overbooking (rmIfOverBooking object) is disabled. A set request for this object will not succeed if it specifies a value that would cause the current bandwidth guarantees on this interface to exceed the maximum bandwidth available for guaranteed services on this interface.
What is rmIfVbrNrtPerClassOverbooking?
Sets the per-class overbooking percentage specifically for the VBR-NRT service category on the interface; a value of 100 disables overbooking for that class.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.18 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfVbrNrtPerClassOverbooking
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.18.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfVbrNrtPerClassOverbooking.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.18.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfVbrNrtPerClassOverbooking OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.18 | rmIfVbrNrtPerClassOverbooking | CISCO-ATM-RM-MIB |