All MIBs › CISCO-ATM-RM-MIB › rmIfUbrPerClassOverbooking
rmIfUbrPerClassOverbooking
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfUbrPerClassOverbooking
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the Per Class Overbooking percentage for UBR service category on this interface. If the value of this object is 100, Per Class Overbooking for UBR is disabled on this interface. Specifying a value that is greater than 100 causes the CAC to scale down the bandwidth allocated to a UBR VC on this interface by a factor that is equal to the inverse of the overbooking percentage specified by this object. A set request for this object will succeed only if the value of the ifAdminStatus object for this interface is 'down' and Interface overbooking (rmIfOverBooking object) is disabled. A set request for this object will not succeed if it specifies a value that would cause the current bandwidth guarantees on this interface to exceed the maximum bandwidth available for guaranteed services on this interface.
What is rmIfUbrPerClassOverbooking?
Sets the per-class overbooking percentage specifically for the UBR service category on the interface; a value of 100 disables overbooking for that class.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.20 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfUbrPerClassOverbooking
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.20.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfUbrPerClassOverbooking.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.20.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfUbrPerClassOverbooking OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.20 | rmIfUbrPerClassOverbooking | CISCO-ATM-RM-MIB |