All MIBs › CISCO-ATM-RM-MIB › rmIfServCategorySupport
rmIfServCategorySupport
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfServCategorySupport
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object controls and reflects the Service Category(s) supported on this ATM interface.
If a bit is set, the corresponding Service Category is supported on the interface, and CAC will allow such connections. If a bit is reset, the corresponding Service Category is not supported on the interface, and CAC will reject such connections.
Write access may not be supported on all interfaces. Not all Service Categories may be supported on an interface. For example, mixing of Service Categories may not be allowed on a VP tunnel interface.
The various bit positions are: 1 constant bit rate (cbr) 2 variable bit rate-real time (vbr-rt) 4 variable bit rate-non real time (vbr-nrt) 8 available bit rate (abr) 16 unspecified bit rate (ubr)
What is rmIfServCategorySupport?
A read-write bitmap indicating which ATM service categories (e.g., CBR, VBR, ABR, UBR) are enabled on the interface; a set bit allows connection admission control (CAC) to accept connections of that category.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.13 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfServCategorySupport
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.13.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfServCategorySupport.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.13.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfServCategorySupport OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.13 | rmIfServCategorySupport | CISCO-ATM-RM-MIB |