CISCO-ATM-RM-MIB :: rmIfScTxClrClp01

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfScTxClrClp01

rmIfScTxClrClp01

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfScTxClrClp01

OID (numeric): 1.3.6.1.4.1.9.10.10.1.4.1.1.11

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: The Cell Loss Ratio estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is an estimate for clp0+1 cells. The unit of this object is negative power of ten (so an object value of 8 means 10**(-8)). This object is valid for Service Categories cbr, vbr-rt, and vbr-nrt. For other Service Categories, the object is not defined.

What is rmIfScTxClrClp01?

Reports the estimated Cell Loss Ratio (as a negative power of ten) for CLP0+1 cells transmitted out this ATM interface for the given Service Category, indicating expected cell loss on outbound traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.4.1.1.11
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfScTxClrClp01

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.4.1.1.11.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfScTxClrClp01.1

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfScTxClrClp01 OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4ciscoAtmRmIfStateCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4.1rmIfServiceCategoryStateTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4.1.1rmIfServiceCategoryStateEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4.1.1.11rmIfScTxClrClp01CISCO-ATM-RM-MIB