All MIBs › CISCO-ATM-RM-MIB › rmIfScTxAcr
rmIfScTxAcr
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfScTxAcr
OID (numeric): 1.3.6.1.4.1.9.10.10.1.4.1.1.3
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: The Available Cell Rate (specified in cells per second) for traffic sent out the interface for this Service Category. This is the bandwidth available for connections. For CBR and VBR Service Categories, this value decreases as a result of connection setup and increases as a result of connection release. For ABR and UBR Service Categories, this value changes as a result of connection setup and teardown only if non-zero mcr is specified.
What is rmIfScTxAcr?
A read-only counter reporting the Available Cell Rate (cells per second) for outbound traffic on the interface for a given ATM service category, showing remaining bandwidth for new connections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.4.1.1.3 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfScTxAcr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.4.1.1.3.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfScTxAcr.1
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfScTxAcr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.4 | ciscoAtmRmIfState | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.4.1 | rmIfServiceCategoryStateTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.4.1.1 | rmIfServiceCategoryStateEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.3 | rmIfScTxAcr | CISCO-ATM-RM-MIB |